|
Weaves
ScotWeave Velvet Base Weave Designer is used to create component
weaves (base weaves) for velvet jacquard. The weave notation, showing
the 3-position lift, is displayed in one window while a second
window displays the cross section showing the pile travel.
ScotWeave can handle multiple-pile designs and all of these
can be combined with cut-out areas of no pile. In the cutout
areas you can see the ground yarns in the fabric view. 
Hole
Checking
An automatic hole-checking feature is available which will
locate areas with insufficient tuft cover where the ground yarns
would show through. The user can specify what is acceptable in terms
of tuft cover.
Fabric
Simulations
Once the weave and colour patterns have been entered the resulting
design will be viewed on screen.
As you change the weave or colour patterns the resulting design
is updated and viewed in real time. A blooming option
is available which spreads the fibres of the tufts to simulate
the effects of shrinks and other variations of fibre types.
Output
Options
You can print the finished design on any standard Windows printer.
With higher resolutions available ScotWeave printout quality exceeds
that of the screen simulations. A separate Jacquard
Looms program is used to output jacquard weave data
to electronic jacquard looms or to print the weave lift information
for card cutting. Production data may also be printed to
a loomcard.
Back
|
